Wireless Digital Node [Communication Device]
The Digital Communication Node is a device that enables all connected sensors (originally wired) for wireless LoRaWAN communication. The Digital Node is compatible with all geotechnical sensors that use the Modbus RTU communication protocol. Once the sensors are connected to this wireless device and the Gateways are correctly installed on-site, they are ready to receive, store and send data. You can freely configure the Digital Node and all the sensors connected remotely using the Move Cloud Platform. Perfect for implementing any monitoring system and meeting all project requirements.
- A wireless device with a built-in long-life battery
- Enables to LoRaWAN wireless communication any wired sensor
- 1 BUS supported, up to 30 sensors
- The sample rate can be set remotely
- Support all Modbus – RS485 sensors
- Extremely easy installation with versatile mounting options
- Waterproof rating IP67
Analyzing the displacement of the ground (settlement or lateral movement) and the stress-deformation state of the ground with inclinometer probes and vibrating ropes. You can also monitor all external atmospheric agents such as wind direction and speed, rain, humidity and temperature.
With sensors such as piezometers, it is possible to monitor the level of groundwater and surface water and correlate it to the soil subsidence values.
The use of crack meters allows you to keep a dangerous crack pattern under control. You can also monitor the stress-strain state of the structural elements using strain gages and correlating the data with the temperature.
By inserting load and pressure cells into the ground, it is possible to monitor both the pressures exerted by the ground and the distribution of loads on the foundations and their deformations.